Find a Service Center
- Single Row Dynamometer Bearing, 65 mm ID x 140 mm OD x 33 mm Wide, Open, Medium Precision (ABEC 5), Phenolic Cage, Special Internal Clearance, 15° Contact Angle, Maximum Capacity
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Cage Type | Phenolic |
| Ball Material | Steel |
| Temperature Range [Max] | 225 °F |
| Cage Material | Phenolic |
| Outer Ring Width | 33 mm |
| Seal Type | Unsealed |
| Limiting Speed - Oil | 5600 rpm |
| Locking Device | No Locking Device |
| O.D. | 140 mm |
| Precision Level | Medium Precision (ABEC 5) |
| Origin | Single Row Radial |
| Snap Ring | No Snap Ring |
| Width | 33.000 mm |
| Capacity | Maximum Capacity |
| icNumber | 7704188 |
| Rows of Balls | Single |
| Precision | Medium |
| Limiting Speed - Grease | 4800 rpm |
| Seal Material | None |
| Material | Steel |
| Lubricant | Oil Preservative |
| Inch/Metric | Metric Bore |
| Inner Ring Width | 33 mm |
| Contact Angle | 15° |
| Dynamic Load Rating | 27200 lbf |
| Bearing Type | Dynamometer |
| Fillet Radius | 2 mm |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 20900 lbf |
| Enclosure | Open |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| I.D. | 65 mm |
| Preload Level | None |
| Weight | 5.0 LB |
| EAN or UPC | 97741008846 |
