Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Contact Angle | 15° |
| O.D. Type | Straight |
| Inch/Metric | Metric Bore |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| Seal Type | Unsealed |
| Precision Level | Medium Precision (ABEC 5) |
| Bearing Type | Dynamometer |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| Capacity | Maximum Capacity |
| Locking Device | No Locking Device |
| Lubricant | Oil Preservative |
| Material | Steel |
| Seal Material | None |
| Enclosure | Open |
| Cage Material | Phenolic |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Temperature Range [Max] | 225 °F |
| Weight | 0.0 LB |
