Find a Service Center
Alternate Products
- Quadruplex Set
- 2 1/4" ID x 3.5433" OD x 5/8" Wide
- Extra Precision
- Universal Mounting
- 1,750 lb Preload
description
- Series L nonseparable angular contact bearings have cutaway shoulders on both the inner and outer rings. They can support very high thrust loads in one direction or combinations of radial and thrust loads, but not radial loading alone. They are designed to provide machine tool drive systems with extreme axial rigidity, low drag torque and minimal lateral runout.
applications
- NC machine tools
- Ball screw supports
- Tool frames
- Cross slides
- X-Y table positioners
- Transfer tables
caution
- Service center personnel can advise what listings and approvals motors carry, but cannot evaluate nor recommend what motors may be suitable for use in hazardous environments
| Precision Level | Extra Precision (ABEC 7) |
| Bearing Arrangement | Universal |
| Extended Thrust Dynamic Load Rating | N/A |
| Lubricant | Oil Preservative |
| I.D. | 2 1/4 in |
| Fillet Radius | 0.04 in |
| O.D. Type | Straight |
| Housing Shoulder Diameter | 3.145 in |
| Radial Internal Clearance Specification | Normal Clearance |
| Ball Material | Steel |
| Cage Material | Phenolic |
| Material | Steel |
| Enclosure | Open |
| Dynamic Thrust Capacity | 7700 lb |
| Drag Torque of Preloaded Set | 12 lb/in |
| Axial Spring Constant | 23.2 lb/in |
| Contact Angle | 65° |
| No. in Set | Quadruplex Set |
| Preload Amount | 1750 lbf |
| Ball Dia. | 0.25 in |
| Width of Set | 2 1/2 in |
| Limiting Speed - Oil | 600 rpm |
| Bearing Type | Ball Screw Support Bearing |
| Preload Level | Heavy |
| Bore Type | Round Bore, Inch Type |
| O.D. | 3.54331 in |
| No. of Balls | 32 |
| Weight | 3315.7 LB |
| EAN or UPC | 4054364935689 |
