Find a Service Center
- Size 146
- 1:1 Ratio
- Vertical, Single, Clockwise, Up Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Max. Overhung Load @ 1750 rpm | 631 lb/in |
| Output (Shaft or Bore) Size | 1 in |
| Input (Shaft or Bore) Size | 1 in |
| Relative Shaft Rotation | Clockwise |
| Shaft Arrangement | #14 |
| Washdown Duty | No |
| Input Shaft Position | Facing You |
| Output Relation to Base | Vertical |
| Output Configuration | Single |
| Unit Size | 146 |
| Bearing Type | Roller Bearing |
| Input Relation to Base | Horizontal |
| Gear Style | Spiral Bevel |
| Box Length | 10.56 in |
| Ratio | 1:1 |
| Input Configuration | Shaft Input |
| Assembly | P |
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Box Height | 4.78 in |
| Output Shaft Position | Up |
| Torque Out @ 1750 rpm | 905 in lb |
| Bolt Hole Pattern | 6 in x 6 in |
| Box Width | 8.78 in |
| Torque Out @ 1150 rpm | 1012 in lb |
| Weight | 51.1 LB |
| EAN or UPC | 781711422526 |
