Find a Service Center
- Size 146
- 1:1 Ratio
- Vertical, Single, Clockwise, Up Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Box Height | 4.78 in |
| Output Configuration | Single |
| Unit Size | 146 |
| Washdown Duty | No |
| Input Relation to Base | Horizontal |
| Input (Shaft or Bore) Size | 1 in |
| Torque Out @ 1150 rpm | 1012 in lb |
| Box Length | 10.56 in |
| Max. Overhung Load @ 1750 rpm | 631 lb/in |
| Gear Style | Spiral Bevel |
| Shaft Arrangement | #14 |
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Relative Shaft Rotation | Clockwise |
| Output (Shaft or Bore) Size | 1 in |
| Box Width | 8.78 in |
| Input Configuration | Shaft Input |
| Bolt Hole Pattern | 6 in x 6 in |
| Output Relation to Base | Vertical |
| Output Shaft Position | Up |
| Input Shaft Position | Facing You |
| Ratio | 1:1 |
| Torque Out @ 1750 rpm | 905 in lb |
| Assembly | P |
| Bearing Type | Roller Bearing |
| Weight | 51.1 LB |
| EAN or UPC | 781711422526 |
