Find a Service Center
- .94" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- Bottom Worm Position
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Fan Cooled | No |
| HP @ RPM | 0.1666667 hp @ 1800 rpm |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 2 3/4 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Box Height | 3 15/32 in |
| Center Distance | 0.94 in |
| Motor Application | General Purpose |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Output Configuration | Left Output |
| Base to Centerline of Input Shaft | 1 9/16 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Lubrication | Mobil SHC634 Synthetic |
| Input Configuration | Shaft Input |
| Box Length | 2 3/4 in |
| Family Name | Std Unit |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Frame Size | Shaft Input, Not a C-Face |
| Box Width | 2 3/4 in |
| Worm Position | Bottom |
| Torque Out @ 1150 rpm | N/A |
| Frame | N/A |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Input HP @ RPM | 0.17 hp @ 1750 rpm |
| Shaft Assembly Code | J |
| Installed Options | Horizontal Base |
| Input (Shaft or Bore) Size | 5/16 in |
| Use With | 309 |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Ratio | 20:1 |
| Output Torque @ RPM | 43 in lb @ 1750 rpm |
| Bolt Center | 2 3/4" x 2 3/4" |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Torque Out @ 1750 rpm | 43 in lb |
| Weight | 10.1 LB |
| EAN or UPC | 781711455210 |
