Find a Service Center
- Single Row Radial Bearing, 8 mm ID x 22 mm OD x 0.406" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The 30 metric series is available with one felt seal (suffix T), with one felt seal and one shield (suffix TD), and with two felt seals (suffix TT). The felt seal provides an effective barrier against the entrance of foreign matter and the escape of lubricant. It is a contact seal with the felt riding on the ground surface of the inner ring O.D. Because the felt washer absorbs some lubricant, these bearings can be operated at moderate speeds without excessive heating. These bearings are electric-motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Contact Angle | 0° |
| Temperature Range [Min] | -30 °F |
| Static Load Rating [Max] | 305 lbf |
| O.D. | 22 mm |
| Dynamic Load Rating | 830 lbf |
| Seal Material | Felt |
| Fillet Radius | 0.012 in |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| I.D. | 8 mm |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Limiting Speed - Oil | 16350 rpm |
| Preload Level | None |
| Temperature Range [Max] | 275 °F |
| Radial Internal Clearance | Normal |
| icNumber | 7700524 |
| Bearing Type | Radial |
| Seal Type | Light Contact Seals |
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Steel |
| Bore Type | Round Bore |
| Inner Ring Width | 0.406 in |
| Lubricant | Polyurea Base |
| Outer Ring Width | 0.406 in |
| Width | 261.925 mm |
| Limiting Speed - Grease | 14010 rpm |
| Enclosure | Double Sealed |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Inch/Metric | Metric Bore |
| Cage Material | Steel |
| Precision Level | Standard (ABEC 1) |
| O.D. Type | Straight |
| Cage Type | Metal |
| Origin | Single Row Radial |
| No. in Set | Single Bearing |
| Weight | 0.04 LB |
| EAN or UPC | 637400593438 |
