Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 7" Stroke
- Steel Rails
- Ball Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Stroke | 7 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Shock Absorbers - Slide | No Shock Absorber |
| Temperature Range [Max] | 165 °F |
| Support Rod Diameter | 20 mm |
| Bearing Type | Ball Bearing |
| Intermediate Stroke | N/A |
| Proximity Sensor Code | J1 |
| Support Rod Material | Steel |
| Cylinder Bore Size | 1.5 in |
| Proximity Sensor | Prox Ready, 12 mm |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Slide Configuration Option Code | C |
| Cushions - Slide | Cushioned (Both Ends) |
| Cylinder Seal Material | Buna-N |
| Port Location | Standard (Position 1) |
| Port Type | NPTF |
| Pressure [Max] | 150 psi |
| Slide Type | Thrust Slide |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Positions | 2 Position |
| Bumpers - Slide | No Bumpers |
| Weight per Inch | 0.48 lb |
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Port Size | 1/4 |
| Series | HBT |
| Base Wt. | 8.86 lb |
| Weight | 12.22 LB |
