The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Bore Size
1.5 in
Stroke
6 in
Stroke Tolerance
+0.030 in / -0.000 in
Temperature Range [Max]
165 °F
Temperature Range [Min]
0 °F
Cylinder Seal Material
Buna-N
Base Wt.
9.83 lb
Pressure [Max]
750 psi
Slide Configuration Option Code
B2, C
Dowel Pin Holes
w/o Dowel Pin Holes
Weight per Inch
0.63 lb
Proximity Sensor Code
None
Bearing Type
Composite Bearing w/Oversized Support Rods
Slide Type
Thrust Slide
Shock Absorbers - Slide
No Shock Absorber
Series
HBT
Port Size
1/4
Positions
2 Position
Port Type
NPTF
Port Location
Standard (Position 1)
Support Rod Material
Steel
Proximity Sensor
No Proximity Sensor
Cushions - Slide
Cushioned (Both Ends)
Bumpers - Slide
Bumpers (Retract Only)
Support Rod Diameter
25 mm
Intermediate Stroke
N/A
Slide Orientation
Right Hand (Standard)
Cylinder Type
NFPA Hydraulic Cylinder
Flow Controls
w/Flow Controls (PrestolLok)
Weight
13.61 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
