The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Support Rod Material
Steel
Stroke Tolerance
+0.030 in / -0.000 in
Slide Type
Thrust Slide
Bearing Type
Composite Bearing
Port Size
1/4
Series
HBT
Cushions - Slide
Cushioned (Both Ends)
Slide Configuration Option Code
C, B1
Proximity Sensor
No Proximity Sensor
Port Location
Standard (Position 1)
Dowel Pin Holes
w/o Dowel Pin Holes
Weight per Inch
0.48 lb
Flow Controls
w/o Flow Controls
Temperature Range [Max]
250 °F
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Extend Only)
Intermediate Stroke
N/A
Proximity Sensor Code
None
Positions
2 Position
Port Type
NPTF
Stroke
2 in
Slide Orientation
Right Hand (Standard)
Cylinder Seal Material
Viton
Temperature Range [Min]
0 °F
Cylinder Type
NFPA Hydraulic Cylinder
Support Rod Diameter
20 mm
Cylinder Bore Size
1.5 in
Base Wt.
8.86 lb
Shock Absorbers - Slide
No Shock Absorber
Pressure [Max]
750 psi
Weight
9.82 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
