Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | A |
| Bore Range [Max] | 3 in |
| Finished Bore | N/A |
| Belt Size | H |
| No. of Teeth | 60 |
| Bore Range [Min] | 0.875 in |
| Bushing Series | 3020 |
| Pitch Diameter | 9.549 in |
| Length Through Bore | 2 in |
| Belt Pitch | 0.5 in |
| Bushing Type | Taper-Lock |
| Outside Dia. | 9.495 in |
| Bore Type | Bushed |
| Type | A |
| Width Across Teeth | 3.375 in |
| Belt Width | 3 in |
| Material | Cast Iron |
| Weight | 17.3 LB |
| EAN or UPC | 697950084053 |
