Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 48 Number of Teeth
- 5.7 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 2 in |
| Type | KF |
| Hub Type | B |
| No. of Teeth | 48 |
| Outside Dia. | 5.7 in |
| Bushing Type | Taper-Lock |
| Hub Dia. | 3.937 in |
| Belt Size | L |
| Belt Pitch | 0.375 in |
| Finished Bore | N/A |
| Length Through Bore | 1.25 in |
| Bushing Series | 2012 |
| Pitch Diameter | 5.73 in |
| Bore Type | Bushed |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 1/4 in |
| Belt Width | 0.75 in |
| Material | Cast Iron |
| Width Across Teeth | 0.813 in |
| Weight | 5.5 LB |
| EAN or UPC | 697950083988 |
