Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 30 Number of Teeth
- 8.246 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 30 |
| Bore Range [Min] | 1.1875 in |
| Material | Cast Iron |
| Belt Pitch | 0.875 in |
| Outside Dia. | 8.246 in |
| Hub Dia. | 6 1/2 in |
| Bore Range [Max] | 3.5 in |
| Type | CF |
| Hub Projection | 1 in |
| Width Across Teeth | 2.25 in |
| Bore Type | Bushed |
| Hub Type | B |
| Length Through Bore | 3.5 in |
| Pitch Diameter | 8.356 in |
| Belt Size | XH |
| Bushing Series | 3535 |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Weight | 27.0 LB |
| EAN or UPC | 697950083735 |
