Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 28 Number of Teeth
- 7.689 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 7.689 in |
| Hub Projection | 1 in |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Length Through Bore | 3.5 in |
| Bore Range [Min] | 1.1875 in |
| Hub Type | B |
| Pitch Diameter | 7.799 in |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 3.5 in |
| Belt Size | XH |
| Bushing Series | 3535 |
| Hub Dia. | 6 1/2 in |
| Belt Pitch | 0.875 in |
| Width Across Teeth | 2.25 in |
| Material | Cast Iron |
| No. of Teeth | 28 |
| Type | CF |
| Bore Type | Bushed |
| Weight | 22.0 LB |
| EAN or UPC | 697950083643 |
