Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.119 in |
| Hub Dia. | 1 5/8 in |
| Belt Size | L100 |
| Belt Width | 1 in |
| Material | Steel |
| Bushing Type | None |
| Bore Type | Reborable |
| Belt Pitch | 0.375 in |
| Hub Projection | 5/8 in |
| No. of Teeth | 18 |
| Bushing Series | N/A |
| Bore Range [Max] | 1.187 in |
| Length Through Bore | 1.875 in |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Type | PB |
| Pitch Diameter | 2.149 in |
| Weight | 1.1 LB |
| EAN or UPC | 697950151151 |
