Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 14 Number of Teeth
- 0.871 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Length Through Bore | 0.781 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 0.562 in |
| Set Screw Size | 8-32 x 1/8 |
| Bushing Series | N/A |
| Belt Size | XL037 |
| No. of Screws | 2 |
| Belt Pitch | 0.2 in |
| Finished Bore | N/A |
| Bushing Type | None |
| Belt Width | 0.25 in, 0.375 in |
| Bore Range [Min] | 0.25 in |
| Hub Type | B |
| Outside Dia. | 0.871 in |
| Type | DF-1 |
| Pitch Diameter | 0.891 in |
| Hub Projection | 0.218 in |
| Material | Steel |
| No. of Teeth | 14 |
| Bore Range [Max] | 0.375 in |
| Weight | 0.08 LB |
| EAN or UPC | 697950099491 |
