Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 13 Number of Teeth
- 1.522 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 1/2 in |
| Bore Range [Min] | 0.375 in |
| Hub Dia. | 1 1/8 in |
| Bushing Type | None |
| No. of Screws | 1 |
| Finished Bore | N/A |
| Outside Dia. | 1.522 in |
| Length Through Bore | 1.25 in |
| Bore Range [Max] | 0.812 in |
| Belt Pitch | 0.375 in |
| Belt Width | 0.5 in |
| Bore Type | Bushed |
| Material | Steel |
| Type | PB |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | 10-24 x 3/16 |
| No. of Teeth | 13 |
| Hub Type | B |
| Bushing Series | N/A |
| Belt Size | L050 |
| Pitch Diameter | 1.552 in |
| Weight | 0.3 LB |
| EAN or UPC | 697950150901 |
