
- 0.63 in Inner Diameter
- 0.88 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A press fit into the housing is required
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
Shaft Dia. [Min] | 0.6245 in |
Series | RCB |
Precision Class | ABEC 1 |
Working Load | 914 lbf |
End Type | Open End |
Self Aligning | No |
O.D. Type | Straight |
Enclosure | Open |
Radial Internal Clearance | N/A |
I.D. | 5/8 in |
Cage Type | Window |
Outer Ring Width | 1 in, 25.4 mm |
Oil Hole | w/o Oil Hole |
Bearing Material | 1014 Steel |
Static Load Rating | 8.14 kN |
Origin | Roller Clutches |
Capacity | Standard Capacity |
Housing Bore [Max] | 0.8755 in |
Operating Temperature [Max] | 230 ˚F |
Mounting Method | Press Fit |
Relubrication Feature | No |
Clamp Torque | 143 lbf |
Housing Shoulder Diameter | 1.2 in |
Tolerance | Iso Class 0 (RBEC 1) |
Lubricant | Rust Preventative |
Cage Material | Nylon |
Precision Ground | Yes |
Component | Assembly |
Bearing Design | Roller Clutch |
Relubricatable | No |
Housing Bore [Min] | 0.8745 in |
Radial Internal Clearance Specification | N/A |
No. of Rows | 3 |
Rolling Element | Roller |
Operating Temperature [Min] | -22 ˚F |
Bore Type | Round Bore, Inch Type |
Speed (Max) Oil | 14000 rpm |
O.D. | 0.875 in |
Overall Width | 1 in, 25.4 mm |
Shaft Dia. [Max] | 0.625 in |
Dynamic Load Rating | 8.05 kN |
Weight | 0.061 LB |
EAN or UPC | 605790193118 |
