Find a Service Center
- 0.5 in Inner Diameter
- 0.75 in Outer Diameter
- 0.88 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Operating Temperature [Max] | 230 ˚F |
| Rolling Element | Roller |
| Bore Type | Round Bore, Inch Type |
| Working Load | 720 lbf |
| Tolerance | Iso Class 0 (RBEC 1) |
| Lubricant | Rust Preventative |
| Capacity | Standard Capacity |
| Enclosure | Open |
| Housing Bore [Max] | 0.7505 in |
| End Type | Open End |
| Self Aligning | No |
| Speed (Max) Oil | 17000 rpm |
| Precision Class | ABEC 1 |
| Cage Type | Window |
| Housing Shoulder Diameter | 1.1 in |
| Origin | Roller Clutches |
| Shaft Dia. [Max] | 0.5 in |
| Series | RCB |
| Bearing Material | 1014 Steel |
| O.D. Type | Straight |
| Dynamic Load Rating | 7.12 kN |
| O.D. | 0.75 in |
| No. of Rows | 3 |
| Clamp Torque | 73.6 lbf |
| Radial Internal Clearance | N/A |
| Outer Ring Width | 0.88 in, 22.23 mm |
| Relubrication Feature | No |
| Shaft Dia. [Min] | 0.4995 in |
| Oil Hole | w/o Oil Hole |
| Bearing Design | Roller Clutch |
| Relubricatable | No |
| Mounting Method | Press Fit |
| Static Load Rating | 6.49 kN |
| Overall Width | 0.88 in, 22.23 mm |
| Operating Temperature [Min] | -22 ˚F |
| Housing Bore [Min] | 0.7495 in |
| Component | Assembly |
| Cage Material | Nylon |
| Precision Ground | Yes |
| Radial Internal Clearance Specification | N/A |
| I.D. | 1/2 in |
| Weight | 0.005 LB |
| EAN or UPC | 605790205729 |
