RC-101410-FS

Single Row Steel Needle Roller Bearing

Item #101737997

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Tolerance	Iso Class 0 (RBEC 1)
Enclosure	Open
Outer Ring Width	0.63 in, 15.88 mm
No. of Rows	1
Shaft Dia. [Min]	0.6245 in
Precision Class	ABEC 1
Bearing Design	Roller Clutch
O.D.	0.875 in
Capacity	Standard Capacity
Relubricatable	No
Operating Temperature [Min]	-22 ˚F
Origin	Roller Clutches
Cage Type	Window
End Type	Open End
Housing Bore [Max]	0.8755 in
Self Aligning	No
Radial Internal Clearance Specification	N/A
Series	RC
Clamp Torque	143 lbf
Housing Bore [Min]	0.8745 in
Lubricant	Rust Preventative
Bore Type	Round Bore, Inch Type
Housing Shoulder Diameter	1.2 in
Rolling Element	Roller
Relubrication Feature	No
O.D. Type	Straight
Overall Width	0.63 in, 15.88 mm
I.D.	5/8 in
Bearing Material	1014 Steel
Oil Hole	w/o Oil Hole
Cage Material	Nylon
Component	Assembly
Mounting Method	Press Fit
Speed (Max) Oil	14000 rpm
Operating Temperature [Max]	230 ˚F
Precision Ground	Yes
Radial Internal Clearance	N/A
Shaft Dia. [Max]	0.625 in
Weight	0.004 LB
EAN or UPC	605790214172