15708

description

• The full length sight window provides easy viewing of a wide range of liquid levels.

applications

• Tanks
• Reservoirs
• Hydraulic equipment
• Steel mill pumps

features

• Mounting - On open tanks with drilled holes, use back mounted gauges fastened from the inside with nuts provided for the 1/2-20 mounting studs. On closed tanks where wall thickness permits tapping, use front mounted gauges installed from the outsi
• Thermometers - 1" dial (0 °F to 220 °F) is standard. The sensing element is fully protected and extends into the tank for accurate temperature indication.
• Material and Operating Conditions - Metal parts are steel protected by zinc plate. O-ring seals are Buna-N, Viton A, or Ethylene Propylene as specified. Sight is gauge glass. Maximum pressure is 125 psi for gauges up to 36". Maximum temperature is

caution

• When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
• When a drive has three pulleys, at least two should be flanged
• If the drive has more than three pulleys, every other pulley should be flanged

options

• Gauges are available with mounting centers up to 60" in 1" increments