Find a Service Center
- 7.7" Maximum Diameter
- 2.9" Stroke Length
- 2.3" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Stroke Length [Max] | 2.900 in |
| Force @ 4 in Stroke | N/A |
| Pressure [Max] | 100 psi |
| Convolutions | Single |
| Force @ 1 in Stroke | 2300 lbf |
| Force @ 6 in Stroke | N/A |
| End Plate Diameter | 4.15 in |
| Force @ 5 in Stroke | N/A |
| Force @ Maximum Stroke (80 psi) | 850 lbf |
| Recommended Isolator Design Height [Min] | 3 1/2 in |
| Force @ 8 in Stroke | N/A |
| Bellows Type | Single Convolution |
| Force @ 12 in Stroke | N/A |
| Style No. | YI-1B |
| Temperature Range [Max] | 150 °F |
| Force @ 9 in Stroke | N/A |
| End Closure | Style 3 End Retainer |
| Compressed Height | 2 in |
| Air Inlet | 1/4 in |
| Blind Tap Spacing | 2 3/4 in |
| Force @ Stroke (80 psi) | 2500 lbf @ 1 in, 2500 lbf @ 2 in, 800 lbf @ 3 in |
| Bumpers | w/Bumpers |
| Fill Port Offset | 1 3/8 in |
| Recommended Isolator Design Height [Max] | 4 1/2 in |
| Air Inlet Type | NPT |
| Temperature Range [Min] | -40 °F |
| Force @ 3 in Stroke | N/A |
| Force @ 2 in Stroke | 1750 lbf |
| Weight | 3.7 LB |
