Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Actuator Type | Solenoid |
| Mechanical Options Code | None |
| Coil Type Code | U |
| Solenoid | Single |
| Surge Suppressor/Damper | None |
| Flow Direction Code | 4 |
| Electrical Options | None |
| Center Position | All Ports Blocked |
| Seal Material | Buna-N |
| Coil Rating Code | G |
| Electrical Options Code | None |
| Response Type | Standard Response |
| AC/DC | DC |
| Pressure [Max] | 3600 psi |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| Reducer Module | N/A |
| Rated Flow [Max] | 25 gal/min |
| Coil Type | DIN 43650 |
| Pilot Valve Type | N/A |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Overrides | No Overrides |
| Function | 2-Position Spring Offset |
| NFPA Size | D05 |
| Mechanical Options | None |
| Spool Code | 2 |
| Pressure Port Check Valve Pressure | N/A |
| Valve Type | Standard-Duty |
| Electrical Connection | DIN 43650 |
| Voltage & Frequency | 12 VDC |
| Design No. | 60 |
| Pilot/Drain | None |
| Operation | Solenoid Operated |
| Crossover | All Ports Blocked |
| Spool Spring Arrangement Code | A |
| Weight | 10.0 LB |
