Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Solenoid Air Gap Code | None |
| Operation | Solenoid Operated |
| Electrical Options Code | L |
| Rated Flow [Max] | 20 gal/min |
| Valve Type | Standard-Duty |
| Indicator Lights | Yes |
| Mechanical Options | None |
| Coil Rating Code | None |
| Electrical Options | None |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Pilot Valve Type | N/A |
| Actuator Type | Solenoid |
| Mechanical Options Code | None |
| Crossover | All Ports Blocked |
| Surge Suppressor/Damper | None |
| Design No. | 51 |
| Function | 3-Position Detented |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Coil Type | No Coil |
| Overrides | No Overrides |
| Flow Direction Code | 4 |
| Spool Spring Arrangement Code | N |
| Solenoid | Double |
| Seal Material | Buna-N |
| Response Type | Standard Response |
| Spool Code | 2 |
| Pressure [Max] | 3000 psi |
| Center Position | All Ports Blocked |
| Pilot/Drain | None |
| Electrical Connection | Ground Terminal |
| NFPA Size | D05 |
| Port Restrictor Plugs | None |
| Reducer Module | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Port T Pressure Rating | 1000 psi |
| Weight | 10.0 LB |
