Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Connection | Ground Terminal |
| Spool Spring Arrangement Code | C |
| Seal Material | Buna-N |
| Crossover | P Blocked, A or B to T |
| Operation | Solenoid Operated |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid Air Gap Code | None |
| Coil Type | No Coil |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Mechanical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Electrical Options Code | None |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Pilot/Drain | None |
| Surge Suppressor/Damper | None |
| Pilot Valve Type | N/A |
| Reducer Module | N/A |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| NFPA Size | D05 |
| Center Position | P Blocked, A & B to T |
| Design No. | 50 |
| AC/DC | AC |
| Flow Direction Code | 4 |
| Coil Rating Code | None |
| Solenoid | Double |
| Function | 3-Position Spring Centered |
| Overrides | No Overrides |
| Indicator Lights | No |
| Valve Type | Standard-Duty |
| Spool Code | 6 |
| Port Restrictor Plugs | None |
| Pressure [Max] | 3000 psi |
| Electrical Options | None |
| Actuator Type | Solenoid |
| Weight | 10.0 LB |
