DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Port T Pressure Rating
5000 psi
Function
3-Position Spring Centered
Spool Code
0
Seal Material
Buna-N
Gauge Ports Code
None
Pilot Valve Type Code
S
Operation
Pilot Operated
Center Position
All Ports Open
Spool Control Modification Code
None
Response Type
Standard Response
NFPA Size
D08
Electrical Connection
Five Pin Connector
Housing Code
W
Surge Suppressor/Damper
None
AC/DC
AC
Design No.
10
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Pilot Drain Code
None
EN Code
None
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Pilot/Drain
External Pilot/External Drain
Electrical Connector Code
PA5
Port Restrictor Plug Code
None
Pilot Valve Type
CETOP 3, Standard Performance
Solenoid Energization Code
None
Electrical Options
None
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5000 psi
Crossover
All Ports Open
Electrical Options Code
None
Spool Spring Arrangement Code
C
Reducer Module Code
None
Solenoid Indicator Lights Code
L
Gauge Port
SAE-4
Response Type Code
None
Coil Rating Code
B
Port Restrictor Plugs
None
Pilot Pressure Code
E
Valve Type
Standard-Duty
Rated Flow [Max]
185 gal/min
Overrides
Plain Override Solenoid Ends
Pressure Port Check Valve Code
None
Indicator Lights
Yes
Reducer Module
N/A
Solenoid
Double
Mechanical Options Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Manual Override Option Code
None
Coil Type Code
F
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
