These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plugs
None
AC/DC
DC
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
Pressure [Max]
5075 psi
Coil Type Code
U
Spool Spring Arrangement Code
C
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Solenoid Code
H
Reducer Module
N/A
Center Position
P Blocked, A & B to T
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Pilot/Drain
None
Voltage & Frequency
24 VDC
Electrical Connector Code
None
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
NFPA Size
D03
Surge Suppressor/Damper Code
None
Seal Material
Buna-N
Design No.
60
Coil Rating Code
H
Electrical Options
None
Solenoid
Double
Housing Code
None
Electrical Connection
DIN 43650
Crossover
P Blocked, A or B to T
Response Type
Standard Response
Mechanical Options
None
Function
3-Position Spring Centered
Coil Type
DIN 43650
EN Code
None
Overrides
No Overrides
Port T Code
7
Function Code
66
Solenoid Energization Code
None
Indicator Lights
No
Spool Code
66
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
