Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Spool Spring Arrangement Code | A |
| Solenoid | Single |
| NFPA Size | D05 |
| Reducer Module | N/A |
| Electrical Options Code | None |
| Operation | Solenoid Operated |
| Mechanical Options Code | None |
| AC/DC | AC |
| Function | 2-Position Spring Offset |
| Electrical Options | None |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Coil Rating Code | C |
| Flow Direction Code | 4 |
| Coil Type Code | U |
| Pressure [Max] | 3600 psi |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Port T Pressure Rating | 1000 psi |
| Indicator Lights | No |
| Cycle Rate [Max] | N/A |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Design No. | 60 |
| Spool Code | 2 |
| Model No. | DG4S4-012A-U-C-60 |
| Electrical Connection | DIN 43650 |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Overrides | No Overrides |
| Pilot Valve Type | N/A |
| Pilot/Drain | None |
| Center Position | All Ports Blocked |
| Valve Type | Standard-Duty |
| Response Type | Standard Response |
| Rated Flow [Max] | 25 gal/min |
| Surge Suppressor/Damper | None |
| Port Restrictor Plugs | None |
| Tank Port Rating | 1000 |
| Crossover | All Ports Blocked |
| Weight | 10.0 LB |
