These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Solenoid Indicator Lights Code
None
Coil Rating Code
H
Reducer Module
N/A
Solenoid Code
H
Pilot/Drain
None
Mechanical Options
None
Electrical Options
None
Design No.
60
Function Code
2
Port Restrictor Plug Code
None
Port T Code
7
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
Spool Indicator Switch Code
None
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
EN Code
None
Solenoid Energization Code
None
Manual Override Option Code
None
AC/DC
DC
Coil Type
Connector Fitted w/Lights
NFPA Size
D03
Crossover
All Ports Blocked
Center Position
All Ports Blocked
Pressure [Max]
5075 psi
Spool Code
2
Seal Material
Buna-N
Surge Suppressor/Damper
None
Coil Type Code
U6
Operation
Solenoid Operated
Solenoid
Double
Port T Pressure Rating
3000 psi
Indicator Lights
No
Pilot Valve Type
N/A
Electrical Connector Code
None
Spool Spring Arrangement Code
N
Housing Code
None
Response Type
Standard Response
Port Restrictor Plugs
None
Function
3-Position Detented
Electrical Connection
Connector Fitted w/ Lights
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
