These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
U
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
Function
2-Position Spring Offset, End to Center
Pressure Port Check Valve Pressure
N/A
Housing Code
None
Port Restrictor Plugs
1 mm Diameter - P Port
Solenoid Indicator Lights Code
None
Electrical Options
None
Crossover
All Ports Open
Surge Suppressor/Damper
None
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Coil Type
DIN 43650
Pilot Valve Type
N/A
Port T Code
6
Function Code
0
AC/DC
AC
Electrical Connection
DIN 43650
Mechanical Options
None
EN Code
EN21
Electrical Connector Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Code
B
Response Type
Standard Response
NFPA Size
D03
Coil Rating Code
B
Cycle Rate [Max]
N/A
Design No.
60
Spool Indicator Switch Code
None
Seal Material
Buna-N
Spool Code
0
Valve Type
High-Performance
Spool Spring Arrangement Code
BL
Manual Override Option Code
None
Solenoid
Single
Port Restrictor Plug Code
P10
Solenoid Energization Code
None
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Pilot/Drain
None
Reducer Module
N/A
Spool Shift Timing
N/A
Indicator Lights
No
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
