These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Solenoid Indicator Lights Code
None
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Surge Suppressor/Damper Code
None
Mechanical Options
None
Housing Code
W
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Valve Type
High-Performance
Surge Suppressor/Damper
None
Response Type
Standard Response
Cycle Rate [Max]
N/A
Electrical Connector Code
None
Manual Override Option Code
None
Coil Rating Code
H
Center Position
All Ports Open
Electrical Options
None
Function Code
0
Voltage & Frequency
24 VDC
AC/DC
DC
Coil Type Code
F
Electrical Connection
No Connector
Spool Code
0
Design No.
60
Overrides
No Overrides
EN Code
None
Operation
Solenoid Operated
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Solenoid Code
H
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
S5
Spool Spring Arrangement Code
A
Seal Material
Buna-N
Port T Code
2
Port Restrictor Plugs
None
Port T Pressure Rating
150 psi
Solenoid Energization Code
None
Indicator Lights
No
Pilot/Drain
None
Crossover
All Ports Open
Spool Shift Timing
N/A
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Solenoid
Single
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
