
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Operation | Solenoid Operated |
Solenoid | Single |
Pressure Port Check Valve Pressure | N/A |
Surge Suppressor/Damper | None |
Pilot/Drain | None |
Seal Material | Buna-N |
Response Type | Standard Response |
Function | 2-Position Spring Centered, End to Center, Single End |
Cycle Rate [Max] | N/A |
Electrical Options Code | None |
Pressure [Max] | 3600 psi |
Electrical Connection | DIN 43650 |
NFPA Size | D05 |
Indicator Lights | No |
Coil Rating Code | D |
Voltage & Frequency | 220 VAC - 50 Hz |
Actuator Type | Solenoid |
Crossover | All Ports Blocked |
Model No. | DG4S4-012B-U-D-60 |
Port T Pressure Rating | 1000 psi |
Pilot Valve Type | N/A |
Overrides | No Overrides |
Coil Type Code | U |
AC/DC | AC |
Coil Type | ISO 4400 (Din 43650) Connector |
Electrical Options | None |
Mechanical Options | None |
Center Position | All Ports Blocked |
Rated Flow [Max] | 25 gal/min |
Valve Type | Standard-Duty |
Design No. | 60 |
Mechanical Options Code | None |
Flow Direction Code | 4 |
Port Restrictor Plugs | None |
Reducer Module | N/A |
Spool Spring Arrangement Code | B |
Tank Port Rating | 1000 |
Spool Code | 2 |
Weight | 10.0 LB |
