These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Up to 21 gpm at 5,000 psi
Crossover
P Blocked, A or B to T
Mechanical Options
None
AC/DC
AC
Port Restrictor Plugs
None
Design No.
60
Solenoid Indicator Lights Code
L
Manual Override Option Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Pilot Valve Type
N/A
Electrical Connector Code
T
Solenoid Energization Code
None
Electrical Options
None
Solenoid
Double
Response Type
Standard Response
Indicator Lights
Yes
Reducer Module
N/A
Housing Code
W
Operation
Solenoid Operated
Spool Code
66
Function Code
66
Cycle Rate [Max]
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
EN Code
None
Electrical Connection
Wired Terminal Block
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
Seal Material
Buna-N
Pressure [Max]
5075 psi
Overrides
No Overrides
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Center Position
P Blocked, A & B to T
Pilot/Drain
None
Port T Code
6
Surge Suppressor/Damper Code
None
Solenoid Code
B
Coil Type Code
F
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Function
3-Position Spring Centered
Coil Rating Code
B
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back