These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Solenoid Code
HL
Coil Rating Code
HL
Electrical Connector Code
T
AC/DC
DC
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Crossover
P Blocked, A or B to T
Port Restrictor Plug Code
None
Spool Code
6
Pilot Valve Type
N/A
Manual Override Option Code
None
Reducer Module
N/A
Spool Shift Timing
N/A
Center Position
P Blocked, A & B to T
Design No.
60
EN Code
None
Port T Code
7
Housing Code
W
Seal Material
Buna-N
Coil Type Code
F
Voltage & Frequency
24 VDC, Low Power Coil
Pilot/Drain
None
Electrical Options
None
Spool Indicator Switch Code
None
Mechanical Options
None
Function Code
6
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
L
Function
3-Position Spring Centered
Port Restrictor Plugs
None
Solenoid
Double
Operation
Solenoid Operated
Electrical Connection
Wired Terminal Block
Surge Suppressor/Damper Code
None
NFPA Size
D03
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Cycle Rate [Max]
N/A
Overrides
No Overrides
Valve Type
High-Performance
Indicator Lights
Yes
Spool Spring Arrangement Code
C
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back