These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
110/120 VAC – 50/60 Hz
Manual Override Option Code
None
Pressure [Max]
5075 psi
Spool Code
2
Pilot/Drain
None
Solenoid
Single
Coil Rating Code
B
Port Restrictor Plugs
None
Solenoid Code
B
Indicator Lights
Yes
Reducer Module
N/A
Electrical Options
None
Actuator Type
Solenoid
Spool Shift Timing
N/A
Electrical Connection
Wired Terminal Block
EN Code
None
Mechanical Options
None
Valve Type
High-Performance
Crossover
All Ports Blocked
Spool Spring Arrangement Code
AL
Port T Pressure Rating
150 psi
Cycle Rate [Max]
N/A
Solenoid Energization Code
None
Function Code
2
Function
2-Position Spring Offset, End to End
Design No.
60
Operation
Solenoid Operated
Pilot Valve Type
N/A
Center Position
All Ports Blocked
NFPA Size
D03
Response Type
Standard Response
Spool Indicator Switch Code
S5
Surge Suppressor/Damper
None
AC/DC
AC
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Indicator Lights Code
L
Port Restrictor Plug Code
None
Electrical Connector Code
T
Pressure Port Check Valve Pressure
N/A
Port T Code
2
Housing Code
W
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Coil Type Code
F
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back