These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Function Code
0
Solenoid Code
B
EN Code
None
Electrical Connector Code
PA5
Surge Suppressor/Damper Code
None
Spool Code
0
Port T Code
6
Coil Rating Code
B
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
BL
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Electrical Connection
Five Pin Connector
Response Type
Standard Response
Design No.
60
Solenoid
Single
Housing Code
W
Reducer Module
N/A
Solenoid Indicator Lights Code
L
Pilot Valve Type
N/A
Center Position
All Ports Open
Surge Suppressor/Damper
None
Overrides
No Overrides
Manual Override Option Code
None
Crossover
All Ports Open
Spool Shift Timing
N/A
Coil Type Code
F
Indicator Lights
Yes
Port Restrictor Plugs
None
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Electrical Options
None
Pilot/Drain
None
Function
2-Position Spring Offset, End to Center
Valve Type
High-Performance
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Operation
Solenoid Operated
AC/DC
AC
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back