
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
Pressure [Max] | 4500 psi |
Spool Code | 2 |
Rated Flow [Max] | 24 gal/min |
Cycle Rate [Max] | N/A |
Port Restrictor Plugs | None |
Coil Type Code | None |
Electrical Connection | KU W/ Deutsch Connector |
Temperature Range [Max] | 122 °F |
Surge Suppressor/Damper | None |
Body Material | Gray Iron |
Actuator Type | Solenoid |
Pressure Port Check Valve Pressure | N/A |
Flow Direction Code | 4 |
Performance | Standard Performance |
Tank Port Rating | 1000 |
Coil Type | Flying Leads |
Indicator Lights | No |
Crossover | All Ports Blocked |
Design No. | 60 |
Electrical Options | None |
Valve Type | Standard-Duty |
Electrical Options Code | None |
Center Position | All Ports Blocked |
Pilot Valve Type | N/A |
Response Type | Standard Response |
Pilot/Drain | None |
Overrides | No Overrides |
Port T Pressure Rating | 1000 psi |
Compatible Fluids | Petroleum Oil |
Temperature Range [Min] | 68 °F |
Leakage | Standard Performance |
Fluid Cleanliness | 19/17/14 micron |
Watt Rating | 30 W |
No. of Stages | Single Stage |
Manual Override | Plain Override |
Operation | Solenoid Operated |
Reducer Module | N/A |
Seal Material | Buna-N |
Mechanical Options Code | None |
Response Time | 50 to 80 ms |
Solenoid | Single |
Model No. | DG4S4-012B-H-60 |
Coil Rating Code | H |
NFPA Size | D05 |
Voltage & Frequency | 24 VDC |
Mechanical Options | None |
AC/DC | DC |
Actuation Identification | Solenoid B |
Mounting | Subplate/Manifold Mount |
Function | 2-Position Spring Centered, End to Center, Single End |
Spool Spring Arrangement Code | B |
Weight | 10.0 LB |
