Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Indicator Lights | No |
| Electrical Options | None |
| Crossover | All Ports Open, Restricted |
| Flow Direction Code | 4 |
| Mechanical Options | None |
| Overrides | No Overrides |
| Model No. | DG4S4-018C-G-60 |
| NFPA Size | D05 |
| Pilot/Drain | None |
| Mechanical Options Code | None |
| Electrical Connection | KU W/ Deutsch Connector |
| Valve Type | Standard-Duty |
| Electrical Options Code | None |
| Operation | Solenoid Operated |
| Coil Rating Code | G |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Surge Suppressor/Damper | None |
| Response Type | Standard Response |
| Leakage | Standard Performance |
| Mounting | Subplate/Manifold Mount |
| Body Material | Gray Iron |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| Coil Type Code | None |
| Temperature Range [Max] | 179.6 °F |
| Center Position | P to T, A & B Blocked |
| Pilot Valve Type | N/A |
| Port Restrictor Plugs | None |
| Temperature Range [Min] | 68 °F |
| No. of Stages | Single Stage |
| Function | 3-Position Spring Centered, Double End |
| Spool Spring Arrangement Code | C |
| Rated Flow [Max] | 20 gal/min |
| AC/DC | AC |
| Watt Rating | 42 W |
| Reducer Module | No |
| Actuator Type | Solenoid |
| Design No. | 60 |
| Pressure Port Check Valve Pressure | N/A |
| Pressure [Max] | 3600 psi |
| Port T Pressure Rating | 1000 psi |
| Tank Port Rating | 1000 |
| Cycle Rate [Max] | N/A |
| Solenoid | Double |
| Coil Type | Flying Leads |
| Fluid Cleanliness | 19/17/14 micron |
| Seal Material | Buna-N |
| Spool Code | 8 |
| Weight | 10.0 LB |
