These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
Coil Type Code
U
Mechanical Options
None
Pressure [Max]
5075 psi
AC/DC
DC
Overrides
No Overrides
Response Type
Standard Response
Housing Code
None
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Cycle Rate [Max]
N/A
NFPA Size
D03
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Port T Code
7
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to Center
Operation
Solenoid Operated
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Electrical Connector Code
None
Spool Spring Arrangement Code
BL
Spool Code
0
Design No.
60
Crossover
All Ports Open
Voltage & Frequency
24 VDC
Solenoid Code
H
Electrical Connection
DIN 43650
Reducer Module
N/A
Center Position
All Ports Open
Coil Type
DIN 43650
EN Code
None
Solenoid Energization Code
V
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
Function Code
0
Actuator Type
Solenoid
Valve Type
High-Performance
Indicator Lights
No
Spool Shift Timing
N/A
Solenoid
Single
Electrical Options
None
Coil Rating Code
H
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
