These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Seal Material
Buna-N
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Coil Rating Code
C
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Port T Code
6
Reducer Module
N/A
Design No.
60
NFPA Size
D03
Electrical Options
None
Pilot Valve Type
N/A
Spool Code
0
Spool Indicator Switch Code
None
Pilot/Drain
None
Crossover
All Ports Open
Solenoid Code
C
Coil Type Code
U
Solenoid
Double
Manual Override Option Code
None
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Electrical Connection
DIN 43650
Indicator Lights
No
Electrical Connector Code
None
Solenoid Energization Code
V
Coil Type
DIN 43650
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Function Code
0
Housing Code
None
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
AC/DC
AC
Center Position
All Ports Open
EN Code
None
Valve Type
High-Performance
Spool Spring Arrangement Code
C
Mechanical Options
None
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Voltage & Frequency
220 VAC – 50 Hz
Operation
Solenoid Operated
Function
3-Position Spring Centered
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
