These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Function
3-Position Spring Centered
Crossover
P Blocked, A or B to T
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Coil Type Code
U
Housing Code
None
Indicator Lights
No
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Electrical Options
None
Port T Code
7
Seal Material
Buna-N
Coil Rating Code
GL
Mechanical Options
None
Manual Override Option Code
H
Reducer Module
N/A
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Solenoid Code
GL
Spool Code
6
EN Code
None
Port T Pressure Rating
3000 psi
Design No.
60
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Coil Type
DIN 43650
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Electrical Connection
DIN 43650
Response Type
Standard Response
Cycle Rate [Max]
N/A
AC/DC
DC
Surge Suppressor/Damper
None
Pilot/Drain
None
NFPA Size
D03
Voltage & Frequency
12 VDC, Low Power Coil
Solenoid
Double
Operation
Solenoid Operated
Function Code
6
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
