These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Electrical Options
None
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
AC/DC
AC
Coil Rating Code
B
Pressure [Max]
5075 psi
Electrical Connector Code
T
Surge Suppressor/Damper
None
Valve Type
High-Performance
Spool Shift Timing
N/A
Pilot/Drain
None
Function
3-Position Spring Centered
Indicator Lights
Yes
Spool Code
6
Coil Type Code
F
Voltage & Frequency
110/120 VAC – 50/60 Hz
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Design No.
60
Solenoid
Double
Port Restrictor Plugs
None
Electrical Connection
Wired Terminal Block
Solenoid Indicator Lights Code
L
Housing Code
J
Mechanical Options
None
Pilot Valve Type
N/A
Reducer Module
N/A
Seal Material
Buna-N
Port Restrictor Plug Code
None
Center Position
P Blocked, A & B to T
Solenoid Code
B
EN Code
None
Solenoid Energization Code
None
NFPA Size
D03
Function Code
6
Port T Code
6
Crossover
P Blocked, A or B to T
Spool Indicator Switch Code
None
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
C
Overrides
No Overrides
Response Type
Standard Response
Operation
Solenoid Operated
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back