These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Solenoid Code
B
Manual Override Option Code
None
Solenoid Energization Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Port Restrictor Plug Code
None
Port T Pressure Rating
3000 psi
Function Code
2
Actuator Type
Solenoid
Operation
Solenoid Operated
Port T Code
6
Design No.
60
Reducer Module
N/A
Spool Indicator Switch Code
None
Pressure Port Check Valve Pressure
N/A
Electrical Connector Code
None
Spool Spring Arrangement Code
C
Solenoid
Double
Cycle Rate [Max]
N/A
Electrical Connection
No Connector
Crossover
All Ports Blocked
Surge Suppressor/Damper
None
Function
3-Position Spring Centered
Center Position
All Ports Blocked
Electrical Options
None
Indicator Lights
No
Surge Suppressor/Damper Code
None
Housing Code
J
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pilot Valve Type
N/A
NFPA Size
D03
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Valve Type
High-Performance
Coil Rating Code
B
EN Code
None
Port Restrictor Plugs
None
Mechanical Options
None
Solenoid Indicator Lights Code
None
AC/DC
AC
Spool Shift Timing
N/A
Seal Material
Buna-N
Spool Code
2
Coil Type Code
F
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
