These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Coil Type Code
F
Design No.
60
Pressure [Max]
5075 psi
Manual Override Option Code
None
Indicator Lights
No
Solenoid
Double
Cycle Rate [Max]
N/A
NFPA Size
D03
Crossover
P Blocked, A or B to T
Pilot Valve Type
N/A
Operation
Solenoid Operated
EN Code
None
Valve Type
High-Performance
Port Restrictor Plugs
None
Function Code
6
Electrical Connection
No Connector
Voltage & Frequency
24 VDC
Spool Spring Arrangement Code
C
Function
3-Position Spring Centered
Mechanical Options
None
Solenoid Code
H
Pressure Port Check Valve Pressure
N/A
Response Type
Standard Response
Port T Code
7
Surge Suppressor/Damper
None
Spool Code
6
Spool Shift Timing
N/A
Overrides
No Overrides
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Electrical Options
None
Reducer Module
N/A
AC/DC
DC
Coil Rating Code
H
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Center Position
P Blocked, A & B to T
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Housing Code
J
Actuator Type
Solenoid
Port Restrictor Plug Code
None
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Seal Material
Buna-N
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
