Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Cycle Rate [Max] | N/A |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Solenoid | Double |
| Electrical Options | None |
| Pressure [Max] | 3000 psi |
| Spool Spring Arrangement Code | C |
| Solenoid Air Gap Code | None |
| Pilot/Drain | None |
| Electrical Connection | Ground Terminal |
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Pilot Valve Type | N/A |
| Function | 3-Position Spring Centered |
| Mechanical Options Code | None |
| Electrical Options Code | None |
| Flow Direction Code | 4 |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Crossover | All Ports Blocked |
| Coil Rating Code | None |
| Mechanical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Spool Code | 2 |
| Overrides | No Overrides |
| Operation | Solenoid Operated |
| Valve Type | Standard-Duty |
| Response Type | Standard Response |
| Design No. | 50 |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Center Position | All Ports Blocked |
| Pressure Port Check Valve Pressure | N/A |
| Seal Material | Buna-N |
| Reducer Module | N/A |
| Coil Type | No Coil |
| AC/DC | AC |
| Weight | 10.0 LB |
