These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Port T Code
2
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Spool Code
2
Spool Spring Arrangement Code
A
NFPA Size
D03
Electrical Connector Code
PA5
Housing Code
W
Seal Material
Buna-N
Electrical Options
None
Spool Shift Timing
N/A
Coil Rating Code
B
Port T Pressure Rating
150 psi
Response Type
Standard Response
EN Code
None
Center Position
All Ports Blocked
Reducer Module
N/A
Function
2-Position Spring Offset, End to End
Valve Type
High-Performance
Manual Override Option Code
None
Solenoid
Single
Electrical Connection
Five Pin Connector
Overrides
No Overrides
Surge Suppressor/Damper
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Crossover
All Ports Blocked
Spool Indicator Switch Code
S5
Rated Flow [Max]
21 gal/min
AC/DC
AC
Indicator Lights
Yes
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Code
B
Port Restrictor Plugs
None
Mechanical Options
None
Cycle Rate [Max]
N/A
Function Code
2
Design No.
60
Pilot/Drain
None
Coil Type Code
F
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back