These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Coil Type
DIN 43650
Solenoid
Double
NFPA Size
D03
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Crossover
P Blocked, A or B to T
Housing Code
None
Port T Code
6
Actuator Type
Solenoid
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Manual Override Option Code
H
Response Type
Standard Response
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Design No.
60
Coil Rating Code
BL
Spool Indicator Switch Code
None
Function Code
6
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Mechanical Options
None
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Coil Type Code
U
Solenoid Energization Code
V
Spool Shift Timing
N/A
Spool Code
6
Valve Type
High-Performance
Electrical Connection
DIN 43650
Pilot/Drain
None
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
EN Code
None
Electrical Options
None
Indicator Lights
No
Operation
Solenoid Operated
Overrides
No Overrides
AC/DC
AC
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Solenoid Code
BL
Center Position
P Blocked, A & B to T
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
