These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Energization Code
None
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
12 VDC
Function Code
6
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Reducer Module
N/A
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Coil Rating Code
G
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Port T Code
7
Spool Code
6
Housing Code
W
Electrical Options
None
EN Code
None
Operation
Solenoid Operated
Mechanical Options
None
AC/DC
DC
NFPA Size
D03
Pilot/Drain
None
Indicator Lights
No
Pilot Valve Type
N/A
Design No.
60
Electrical Connection
No Connector
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Function
3-Position Detented
Spool Shift Timing
N/A
Overrides
No Overrides
Response Type
Standard Response
Spool Spring Arrangement Code
N
Solenoid Indicator Lights Code
None
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Manual Override Option Code
H
Spool Indicator Switch Code
None
Solenoid
Double
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Crossover
P Blocked, A or B to T
Solenoid Code
G
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Coil Type Code
F
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
