These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P Blocked, A & B to T
Reducer Module
N/A
Solenoid Code
H
Solenoid
Double
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
N
Actuator Type
Solenoid
AC/DC
DC
Coil Rating Code
H
EN Code
EN21
NFPA Size
D03
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Port T Pressure Rating
3000 psi
Spool Code
6
Voltage & Frequency
24 VDC
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Port T Code
7
Function
3-Position Detented
Valve Type
High-Performance
Solenoid Indicator Lights Code
None
Coil Type Code
U
Seal Material
Buna-N
Response Type
Standard Response
Electrical Connector Code
None
Housing Code
None
Spool Shift Timing
N/A
Operation
Solenoid Operated
Indicator Lights
No
Manual Override Option Code
None
Electrical Connection
DIN 43650
Mechanical Options
None
Design No.
60
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Overrides
No Overrides
Function Code
6
Coil Type
DIN 43650
Surge Suppressor/Damper
None
Crossover
P Blocked, A or B to T
Pressure [Max]
5075 psi
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
