These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Five Pin Connector
Surge Suppressor/Damper
None
Coil Type Code
F
Reducer Module
N/A
Overrides
No Overrides
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
L
Actuator Type
Solenoid
Indicator Lights
Yes
Solenoid Code
B
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Solenoid Energization Code
None
Valve Type
High-Performance
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure [Max]
5075 psi
Port T Code
6
Manual Override Option Code
H
Coil Rating Code
B
Function Code
2
EN Code
None
Spool Spring Arrangement Code
A
Solenoid
Single
Housing Code
W
Surge Suppressor/Damper Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Electrical Connector Code
PA5
Port Restrictor Plug Code
None
Spool Code
2
Design No.
60
Crossover
All Ports Blocked
Port T Pressure Rating
3000 psi
Pilot/Drain
None
Port Restrictor Plugs
None
AC/DC
AC
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Seal Material
Buna-N
Mechanical Options
None
Spool Shift Timing
N/A
Function
2-Position Spring Offset, End to End
Electrical Options
None
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back